Is it possible to add the iSMA MIX-IP modules offline in Niagara 4.15, complete all engineering work in advance, and then replace them with the actual site modules once they are available?
Probably in its current iteration, probably not but most products allow manual creation of points and such, though that’s probably more tedious.
Hi Ravi,
You can simply add an isma I.O module to a station you are just running up on your workbench to then download to a Jace or Mac controller.
I do it all the time.
You will need to have the ISMA modules on your workbench. So you can drop one from the palette onto your chosen driver.
You can even set up the input types, before downloading so they should work as soon as you establish comms with the card.
Regards
Keith
Thank you for your support.
I am using Tridium EMEA Niagara 4.15 and have installed the iSMA Modules JAR file. I have added the MIX-18 Fully Loaded Module under the BACnet device.
Within the module, I can see UI, DI, AO, DO, and Settings. Would it be possible to delete the unused default points (for example, the Temperature(deg F) points under UI or the Counter points under DI, Enum points in Setting) if they are not required for my application?